AeroVironment EVSE-RS JuiceNet ® Edition Wi-Fi Enabled EV Charging Station (Hardwire)
This product cannot be shipped to P.O. Boxes
AeroVironment EVSE-RS, JuiceNet Edition is a smart-grid enabled version of a leading AeroVironment EV charging station. It will automatically adjust to provide just as much power as your EV is able to accept. This unit is ready to be hardwired by a qualified electrician.
- Wi-Fi enabled
- 32 amps
- 25-ft cable
At 32 amp (7.6kW), the AeroVironment EVSE-RS charges up to 10x faster.
Monitor, manage, and control your charging experience via voice commands on Amazon Alexa and Google Home.
Works with all models of electric vehicles (except Tesla).
Convenient and Attractive Design
Don't let life pass you by. With indicator lights showing the current charging status, you will never miss a beat. (Includes an integrated cord hanger).
Wi-Fi Enabled Smartphone Control
Control time of charge and maximum charge rate, monitor power, amperage and more.
Weather resistant 25-ft cable. The unit is rugged, weatherproof and durable.
What's in the box
What's included with your AeroVironment EVSE-RS JuiceNet Edition
AeroVironment EVSE-RS, JuiceNet Edition EV Charging Station featuring:
- A 32-amp 25-ft charging cable (also known as a J1772 cable)
- A wall mount cable hanger
Ready to be hardwired by a qualified electrician
A hardwired EVSE station requires a certified electrician to connect the station in a protected, NEMA-compliant enclosure. The list below details typical installation requirements for a hardwired unit:
- 2 pole, 40A breaker
- #8AWG copper wire with 2 conductors and a ground. If single conductor THHN wire is used, the ground may be #12AWG per NEC 250.122 calculations
For an outdoor installation, please add the following:
- NEMA rated outdoor junction box with gasketed cover
Recommend against GFI circuit breaker
Please, only use the pre-drilled opening on the bottom of the box for hardwire applications. We cannot honor the warranty if any other holes are added to the unit.
A fusible disconnect may be required within 6' of your EV charger device installation, please consult your local code.
Wi-Fi is NOT required to use the EV charging station. However, you will need a Wi-Fi connection to use smart charging features, including:
- Access JuiceNet app via Smartphone or web from anywhere.
- Track energy usage, allowing you to view your charging history and extract accurate energy data.
- See real-time data
- Start & Stop charging remotely
- View cost savings per charging session
Your charging station will act as a standard charging unit in absence of Wi-Fi. If you set it up on Wi-Fi but then disconnect it, any schedules or limits you set when connected to the station may remain even if the station is not connected to Wi-Fi. Wi-Fi memory will be erased upon unplugging from power and will be reinstated once connected to Wi-Fi again.
If you have more than one EV, you can set up your two (or more) units to share one electrical circuit. Say, you have only 40A capacity in your panel but have two vehicles charging simultaneously. You can program your units to never exceed 40A combined draw. If only one car is charging, it gets the full 40A of current. When the second car shows up, the current gets shared 20A / 20A between the two. When one of the cars finishes charging, the remaining car ramps back up to 40A.
Charge Time Table
This Charge Time Table shows approximately how much electric range a typical EV can recover for charging stations with different capacities. Level 1 charging stations use 120 V, while Level 2 charging stations use 240 V. Charging capacity is rated in kilowatts (kW), while the vehicle's battery pack is rated in kilowatt-hours (kWh).
|Level 1 EVSE
|Level 2 EVSE
40A/10kWJuiceBox Pro 40
|Charging Time||Miles per Charge|
|Output Power||32A, 7.6kW|
|Input Voltage||208-240 VAC nominal, single phase|
|Output Cable||25 FT standard length, 20 FT extension cables available
SAE J1772 standard plug
|Dimensions||12 x 12 x 8 inches (H, W, D - main enclosure)|
|Shipping Dimensions||20 x 16 x 10 inches (H, W, D - dual walled box)|
|Certifications||UL, CE, NEMA, SAE compliant|
|Warranty||3 year manufacturer's warranty for residential usage|
JuiceBox Pro 40
The JuiceBox Pro 40 is a high power, fully ruggedized, portable charger that plugs into a variety of 240V outlet types.View the JuiceBox Pro 40